HEATING SYSTEMS
Heating Equipment Installations • Replacements • RED TAG Code Corrections • Equipment Optimization
Furnaces • Tankless & Water Heaters • Heating Accessories
-
![Water heater and HVAC furnace in a utility closet.]()
FURNACES: INSTALLATIONS & REPLACEMENTS
Straight-up installs. No shortcuts. No “good enough.” We don’t do cheap — we do it right.
When a furnace is past the point of repair — cracked heat exchanger, unsafe operation, or constant breakdowns — we don’t gamble with patches. We size it properly, pipe it properly, vent it properly, and build a system that’s meant to last — not limp along.
What you get with our replacements:
Proper sizing — not oversized, not undersized
Clean gas piping, tight venting, correct drainage
Top-of-the-line equipment that actually holds up
Code-compliant wiring, safeties, and clearances
Rock-solid sheet metal and clean transitions
Smart thermostat integration (on request)
A system that heats evenly — no cold rooms
We don’t do bargain installs, builder-grade shortcuts, or “it’ll probably be fine.” If you want cheap, we’re not your guys. If you want done right, that’s exactly what we deliver.
Built to last. Built to look proper. Built for real Canadian winters.
-
![A water heater in a utility closet with shelving on the left and an air duct on the right.]()
HOT WATER SYSTEMS: INSTALLATIONS & REPLACEMENTS
Reliable hot water, installed the right way — no shortcuts, no corner-cutting, no bargain setups.
Whether it’s a tankless upgrade or a straight swap on an existing water heater, we build systems that run clean, safe, and efficient. Proper gas sizing, proper venting, proper drainage — the stuff that actually matters but gets ignored in cheap installs.
What we install & replace:
Tankless water heaters (high-efficiency, endless hot water)
Gas water tanks (power-vented, natural draft)
Electric water heaters
Recirculation systems (where applicable)
Mixing valves & safety upgrades
What you get with us:
Correct venting — no backdrafting, no guesswork
Proper gas pipe sizing for tankless (most people mess this up)
Clean drainage, tidy piping, and secure supports
Top-tier equipment that lasts — not builder-grade throwaways
Code-compliant installs that won’t get you tagged
Fast, reliable hot water with zero drama
We don’t do “good enough.”
We don’t do cut-rate tankless installs running on undersized gas lines.
We do clean, reliable work built for long service life — period.We don’t do bargain installs, builder-grade shortcuts, or “it’ll probably be fine.” If you want cheap, we’re not your guys. If you want done right, that’s exactly what we deliver.
Built to last. Built to look proper. Built for you.
-
![Metal HVAC duct system with flexible insulated ducting, mounted on a basement wall with pink insulation, next to a water heater.]()
HEATING ACCESSORIES
Smart controls, air quality gear, safety upgrades — the add-ons that actually make your system run better, not just look good on paper.
These aren’t gimmicks. They’re the parts that dial in comfort, protect your equipment, and keep your system running the way it should. Clean installs, proper wiring, proper routing — no sloppy add-ons, no “good enough,” no cheap shortcuts.
What we offer:
Smart Thermostats & Controls
Wi-Fi thermostats, programmable stats, zoning controls — properly wired and calibrated.Humidifiers & Dehumidifiers
Aprilaire, bypass, fan-powered — clean water lines, correct drainage, and proper placement.HRVs & ERVs
Balanced ventilation, fresh air intakes, clean ducting, sealed connections — no rattles, no leaks.Safety & System Upgrades
Float switches, condensate pumps, low-water cutoff devices, freeze protection, and sensors.Filter Racks & Air Quality Add-Ons
Media filters, upgraded filter housings, and cleaner transitions for better airflow.Ductwork Touch-Ups
Small corrections, sealing, transitions, airflow fixes, and add-on branches where needed. -
![Commercial Heating System Repairs]()
Commercial Heating System Repairs
We diagnose fast, isolate the issue, and get heat back online without the runaround. Worn burners to failed gas valves, cracked heat exchangers, seized blower motors, or rooftop safeties tripping, etc.
What we repair:
Rooftop units (RTUs)
Commercial gas furnaces
Unit heaters & warehouse heaters
Gas valves, ignition systems, flame rectification
Blower motors, belts, bearings
Safeties, limits, sensors & controls
Venting and combustion air issues
Gas pressure problems & red-tag corrections
-
![Residential Heating System Repairs]()
Residential Heating System Repairs
When your home heat fails, you don’t need upsells, scare tactics, or guesses. You need a tech who can walk in, pinpoint the issue, and get the system running safely. That’s the only thing we offer.
What we repair:
Gas furnaces (no heat, short cycling, poor airflow)
Hot water tanks & tankless units
Ignition systems, flame sensors, gas valves
Blower motors, inducer motors, pressure switches
Thermostats & control failures
Venting & combustion air problems
Leaks, rusted gas piping, and red-tag corrections
Noisy systems, weak airflow, cold rooms
and more.
It Starts With Proper Maintenance — No Exceptions.
Your heating equipment only performs as well as it’s maintained. We service and maintain all rooftop units and furnace systems for commercial buildings, keeping your tenants, staff, and customers out of the cold.
East Hook provides structured maintenance programs — monthly, quarterly, semi-annual, or annual — built around your building’s demands, not guesswork. Our work is direct and thorough: filter changes, belt replacements, cleaning, lubrication, combustion and heating checks, and full system inspections.
If a component fails, we source and replace it quickly so your operation doesn’t stall. Belts, filters, and routine cleanings are included in the plan. Any failed or damaged parts are billed separately — and we never replace anything that doesn’t need replacing. No upsells. No nonsense. Just reliable, code-tight performance for the equipment your building depends on.
When Your Heat Fails, We Don’t.
Residential heating issues don’t wait, and neither do we. Whether it’s a furnace acting up, a garage heater locking out, or a tankless water heater overdue for a proper flush — we handle the problems that keep your home uncomfortable.
We diagnose fast, fix what matters, and don’t waste your time with guesswork. Combustion issues, dirty burners, cracked igniters, pressure problems, failed sensors, weak airflow, leaking tanks — we’ve seen it all. If it can be repaired, we’ll repair it. If a part is truly finished, we’ll replace it with the right one and get the system back online.
For tankless systems, we provide full descaling and maintenance to keep them running at full output. For furnaces and garage heaters, we tune, clean, test, and verify everything from safeties to airflow.
No gimmicks. No unnecessary replacements. Just straight, reliable service when your home needs heat and hot water — now.
RED TAG CODE CORRECTIONS
When someone leaves you with a red tag, we sort it out properly. Leak checks, re-pipes, venting corrections, valve upgrades—rebuilt to code and cleaned up the way it should’ve been done the first time. We handle all A/B red tags—diagnostics, repairs, and full code corrections.
Known also as a “Safety Violation Notice”
